CombiMag and CombiMagBloc
CombiMag
Heavy duty seal-less mag drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858, from SPX Johnson Pump, suitable for clean and slightly contaminated liquids having impurities that must not be abrasive or magnetic.
Features
- 100% leakfree
- Long life cycle, reduced maintenance costs
- Flanges according to ISO 7005 PN 16
- Outstanding hydraulic performance
- High efficiency impeller
- Closed impeller with back vanes providing axial balancing of impeller loads
- Half open impeller with wear plate
- Easy maintenance through the Back-Pull-Out principle
- Atex certification
- Outer rotor with safety bearing
- Somarium Cobalt high performance magnets
- Containment can in Hastelloy® for limited eddy current losses
- Silicon carbide pump liquid lubricated internal bearings
- Heating jackets optional
- Grease or oil bath lubricated bearings
- PT 100 temperature monitoring
- Interchangeable with existing ISO 2858 pumps
| Technical Data | CombiMag |
|---|---|
| Casing | Cast iron, Nodular cast iron, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
| Impeller | Cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
| Max. capacity | 550 m3/h |
| Max. delivery head | 160 m |
| Max. pressure | 1600 kPa (16 bar) |
| Viscosity | 0.3 mPas - 150 mPas |
| Max. speed | 3600 rpm |
| Liquid temperature | -50 up to 300°C |
CombiMagBloc
Heavy duty seal-less closed coupled magnetic drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858, from SPX Johnson Pump, suitable for clean and slightly contaminated liquids having impurities that must not be abrasive or magnetic.
Features
- 100% leakfree
- Long life cycle, reduced maintenance costs
- Flanges according to ISO 7005 PN 16
- Outstanding hydraulic performance
- High efficiency impeller
- Closed impeller with back vanes providing axial balancing of impeller loads
- Half open impeller with wear plate
- Easy maintenance through the Back-Pull-Out principle
- Atex certification
- Outer rotor with safety bearing
- Somarium Cobalt high performance magnets
- Containment can in Hastelloy® for limited eddy current losses
- Silicon carbide pump liquid lubricated internal bearings
- Heating jackets optional
- Standard IEC flange motor
- PT 100 temperature monitoring
- Interchangeable with existing ISO 2858 pumps
| Technical Data | CombiMagBloc |
|---|---|
| Casing | Cast iron, Nodular cast iron, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
| Impeller | Cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
| Max. capacity | 280 m3/h |
| Max. delivery head | 140 m |
| Max. pressure | 1600 kPa (16 bar) |
| Viscosity | 0.3 mPas - 150 mPas |
| Max. speed | 3600 rpm |
| Liquid temperature | -50 up to 200°C |